Hyperliquid funding, margin and liquidation explained
Updated Nov 12, 2026 · 6 min read
How Hyperliquid funding, margin modes and liquidation work, with Nov 2026 numbers and a worked $10,000 example. Fee tiers have their own page.
A Hyperliquid perpetual costs you in three ways: the exchange fee on each fill, the funding payment every hour you hold the position, and, if the price runs too far against you, liquidation. This page covers funding, margin and liquidation with the numbers as of Nov 7, 2026, from Hyperliquid’s own docs, and shows how Senpi applies them. Fee tiers, discounts and builder fees by app are in Hyperliquid fees explained.
Key takeaways
- Trading fees start at 0.045% taker and 0.015% maker per fill, and Senpi adds none on paid plans; tiers, discounts and app fees have their own page.
- Funding is paid every hour, long to short when the perp trades above spot, capped at 0.5% an hour.
- Maintenance margin is half the initial margin at max leverage, so a 5x BTC long is liquidated about 19% below entry, a 20x long about 3.8% below.
- On Senpi, take-profit and stop-loss percentages are on margin, not price: at 10x a 10% stop fires on a 1% move.
What a trade costs on Hyperliquid
Every fill pays Hyperliquid’s fee on the notional, not the margin: 0.045% as a taker and 0.015% as a maker at the base tier, so a $10,000 position costs $4.50 to open with a market order. There is no fee on liquidations or on funding payments, and Senpi adds 0% on paid plans. Volume tiers, HYPE staking and referral discounts, builder fees by app and the rates on stock perps are in Hyperliquid fees explained.
Funding: paid every hour
Funding keeps the perp price close to spot. Every hour, one side pays the other: when the perp trades above the oracle price the rate is positive and longs pay shorts; below it, shorts pay longs. The payment is peer to peer, Hyperliquid takes nothing from it, and it is settled from your margin balance at the top of each hour.
- Rate
- Average premium of the perp over the oracle price, plus a fixed interest component of 0.01% per 8 hours (0.00125% an hour), clamped so the two cannot drift more than 0.05% apart. The 8-hour rate is paid in eight hourly slices.
- Payment
- Position size × oracle price × hourly rate. A $10,000 long at a 0.01% hourly rate pays $1 an hour, $24 a day, while the rate holds.
- Cap
- 0.5% an hour, the same for every asset. That is far looser than centralised exchanges, so a crowded trade can get expensive to hold.
- On Senpi
- Funding applies to every open position in a strategy and is separate from fees. The agent reads the current rate when it sizes a trade; the live rate per asset is on each asset page.
Margin modes and leverage
Option A
Cross margin
- All cross positions in a strategy share one collateral pool
- Unrealised profit on one position backs the others
- Capital efficient, but one bad position can take the pool down
Option B
Isolated margin
- Each position has its own margin
- Liquidation touches only that position
- You can add or remove margin after opening
VerdictHyperliquid sets the margin mode per market. Crypto perps allow cross margin, Senpi’s default there. On the XYZ DEX, 22 of 122 markets allowed cross margin on Nov 12, 2026, including the S&P 500, gold, oil and SpaceX; the rest were isolated only. The full list is in tradeable assets.
Initial margin is notional divided by leverage: $10,000 at 5x needs $2,000. Max leverage depends on the asset (up to 40x on BTC, 25x on ETH, 20x on TSLA and NVDA, lower on thin markets). Within one strategy you can hold a BTC long and an ETH short together, but not a long and a short on the same asset; use two strategies for that (see strategy types and sub-wallets).
Where liquidation sits
Hyperliquid liquidates when account equity falls below the maintenance margin, which is half of the initial margin at the asset’s max leverage: 1.25% of notional on a 40x asset such as BTC, 2.5% on a 20x asset such as TSLA, 5% on a 10x asset such as xyz:PLTR. The distance from entry to liquidation therefore depends on the leverage you chose and on the asset’s maximum.
| Leverage | 40x-max asset (BTC) | 10x-max asset (xyz:PLTR) |
|---|---|---|
| 3x | about 32% below entry | about 30% below entry |
| 5x | about 19% below entry | about 16% below entry |
| 10x | about 8.9% below entry | about 5.3% below entry |
| 20x | about 3.8% below entry | not available |
| 40x | about 1.3% below entry | not available |
- Liquidation uses the mark price (external prices blended with Hyperliquid’s book), not the last trade, so it can trigger during a wick that never prints on the chart.
- Positions above $100,000 are liquidated 20% at a time, with a 30-second cooldown.
- The first attempt is a market order on the book, and whatever margin is left after it stays yours. Only if equity falls below two thirds of maintenance does the liquidator vault take the position and the margin.
- There is no liquidation fee. The cost is the maintenance margin you lose if the backstop takes over, which is why a stop placed before the liquidation price keeps more of your money.
Senpi’s exit management is built for this: the ratchet stop moves a protective floor up as a trade gains, so positions close on your rule before Hyperliquid closes them on its rule. See the Exit Management articles.
TP/SL on Senpi: percentages are on margin
When you set a take-profit or stop-loss on a Senpi strategy, the percentage is a return on margin, not a move in price. At 10x leverage a 10% take-profit fires after a 1% price move; a 10% stop-loss fires after a 1% move against you. Triggers close the whole position; for partial exits, resize the position instead (see opening, editing and closing positions).
A worked example
A $10,000 BTC long at 5x, isolated, opened on Senpi’s Pro plan at the base Hyperliquid tier, as of Nov 7, 2026.
| Item | Amount | How |
|---|---|---|
| Margin posted | $2,000 | $10,000 ÷ 5 |
| Open, as taker | $4.50 | 0.045% × $10,000 |
| Open, as maker | $1.50 | 0.015% × $10,000; Senpi tries maker first |
| Senpi fee | $0 | Pro plan; $3 on the free trial or without a paid plan, at 0.03% |
| Funding, one day at 0.01% an hour | $24 | $10,000 × 0.01% × 24, paid to shorts while the rate is positive |
| Liquidation price | about 19% below entry | maintenance 1.25% of notional, before funding |
| Close, as taker | $4.50 | 0.045% × $10,000 |
Frequently asked questions
Does Senpi charge a fee on top?
Not on paid plans: Pro, Advanced and Quant trade with 0% Senpi fees. The free trial, or trading without a paid plan, adds 0.03% per trade.
How often is funding paid on Hyperliquid?
Every hour, at one eighth of the 8-hour rate, capped at 0.5% an hour. Longs pay shorts when the perp trades above spot, shorts pay longs when it trades below.
When am I liquidated?
When equity falls below the maintenance margin, half of the initial margin at the asset’s max leverage. On BTC that is 1.25% of notional: about 19% below entry at 5x, 8.9% at 10x, 3.8% at 20x.
Is there a liquidation fee?
No. The first attempt is a market order on the book and any margin left is yours. If the backstop vault takes the position, the maintenance margin is not returned.
See the live rates on Senpi
Fees, funding and the liquidation price are shown on every position before you open it.
Related articles
Hyperliquid fees explained (Nov 2026): maker, taker, builder fees
On a paid Senpi plan you pay only Hyperliquid’s fee. Hyperliquid’s fees on Nov 12, 2026: 0.045% taker, 0.015% maker, tiers, discounts, builder fees by app and HIP-3 rates.
Anthropic stock before the IPO: how to trade ANT now (Nov 2026)
You can trade Anthropic before its IPO: the ANT pre-IPO perp trades 24/7 on Hyperliquid and Senpi, long or short. How it’s priced, what happens at listing, the risks.
Hyperliquid order types: limit, market, stop, TP/SL, TWAP and more
Every Hyperliquid order type and option as of Nov 9, 2026: what each does, when to use it, and whether it pays the maker or the taker fee.
Hyperliquid vaults and HLP explained
How Hyperliquid’s HLP and user vaults work as of Nov 9, 2026: who trades them, profit share, lock-ups, what they can trade, and the risks.